halogen lamp shade

halogen lamp shade

Halogen Lamp Shade: The Heat Solution for Tough Industrial Jobs

We make halogen lamp shades that step right in as heating elements for industrial equipment. They’re built for one thing: focused, high-intensity heat in a small footprint. These aren’t your average lamps. They’re purpose-built to give you steady, controllable heat, even when the work demands it.

Power, Voltage, and Fit: What Matters on the Floor

You size these lamps around wattage, voltage, and length, so the heat matches the job. A common setup is 2500W at 400V, which packs serious heat density without pulling too much current. The 300mm tube length is a sweet spot. It slips into tight heating zones and drops right into existing housings, so you don’t have to redesign the whole assembly. Match the voltage to your control panel and the wattage to your heat needs, and the output stays even across the whole tube.

The Build: Quartz, Coating, and a No-Fuss Connector

The tube is quartz, and for good reason. It stands up to rapid temperature swings and lets the heat through cleanly. The halogen cycle keeps the filament and quartz cleaner, so performance stays consistent over time. A reflective coating pushes infrared energy forward, so more heat goes where you want it and less is wasted. Then there’s the R7s connector. Two pins, straight-line, simple to wire. It snaps into place and holds steady, even when things get seriously hot.

Where It Shines—and What to Keep in Mind

You’ll see these used a lot in PET blowing, plastic welding, and shrink-wrap tunnels. They heat up fast, and the temperature control feels predictable, which is exactly what you need when the clock is ticking. The compact size and focused heat cut warm-up time and help keep cycle-to-cycle temperatures steady. A couple of things to watch for: that high heat density means your machine needs solid cooling and proper shielding. When you handle the lamp, only touch the base. And before you install, double-check your socket rating.