Let’s talk about the 775mm 2200W Double Tube Halogen Lamp
If you’re running high-density drying or curing lines, you know the struggle of lamps burning out right when you need them most. That’s why we built this 775mm quartz tube. The secret is in the “double-tube” setup. We basically nest one quartz tube inside another and fill that gap with halogen gas. Why? Because it stops the filament from evaporating so quickly. It keeps your light output steady for thousands of hours, so you aren’t constantly swapping out dead bulbs. The power behind it At 2200W packed into 775mm, this thing puts out a serious amount of heat. It’s a lot of wattage for a small space, which is great news for your workflow because your workpieces ramp up to temperature way faster. We use high-purity quartz glass here—not the cheap stuff—so the tube doesn’t warp or snap when things get scorching. Why the double tube actually matters Standard single-tube lamps usually give up the ghost when you push them too hard. But the pressurized environment in our double-tube design protects the tungsten filament. It lets us crank it up to 2200W without the whole thing falling apart. It plays nice with most industrial controllers, but a quick heads-up: make sure your power supply can handle that initial “cold-start” surge. It hits hard at first. Getting it into your line These are pretty much plug-and-play for PET blowing machines, paint tunnels, or shrink wrappers. One cool thing is that the quartz lets short-wave infrared pass right through. This means the heat slams directly into your material instead of just wasting energy heating up the air around it. Just a word of caution. 2200W in this size creates a massive amount of radiant heat. If your vents are clogged or your fans are too weak, you’re going to fry your lamp sockets. Do yourself a favor and use high-temp wiring—nothing kills a mood like melted insulation at the terminals.